what's the centre hole bore on these nissan rims?

Post by **CruiserRomey** » Mon Apr 27, 2015 9:24 pm

HI Folks,

checking to see if some might know. looking to get this rim/winter tire combo.

http://www.kijiji.ca/v-tires-rims/ottaw ... 1066522855

http://www.originalwheels.com/nissan-wh ... 2147-b.jpg

I used to have an 88 pathy that had these rims but i can't remember the size of the centre hub bore.

anyone? please and thanks!

Post by **Morpheus** » Mon Apr 27, 2015 9:53 pm

The spec I get for the 88 Pathy is:

15X6 6-51/2 41/106

If I remember my info correctly:

15x6 is wheel size
6-5 1/2 is bolt pattern
41 is offset
106 is hub centre

but I'm not 100% on the last 2 numbers, so please verify before buying, don't go on my word.

Post by **CruiserRomey** » Mon Apr 27, 2015 10:43 pm

thanks Morpheus! almost like the toyota rims. don't think they'll work, i need 108 hub center. thought i saw 100/smaller too. ah well..
hmm, maybe chevy rims...

Post by **Adam** » Tue Apr 28, 2015 12:17 am

The Lego's are 15x7, it's the steel wheels that are 15x6. I have an extra set of legos I could measure the bore to verify for you if you like?

Chevy rims will need the bores made bigger. But funny enough, the pathy rims fit on a chevy just fine lol.

Post by **Nd4SpdSe** » Tue Apr 28, 2015 8:54 am

If I remember right, Toyota rims work on a Nissan, but Nissan rims don't work on a Toyota for the reason of the center bore.

Post by **Snafu** » Tue Apr 28, 2015 9:26 am

So hub centric versus lug centric is the difference. Lug centric wheels are a PITA - avoid if you can

Post by **CruiserRomey** » Tue Apr 28, 2015 5:54 pm

good clarifications. thanks fellas. i read somewhere centre bore is 100 on these and maybe 106 on the yotas which makes sense. mitsubishis need 108.

adamzan, if it's not out of the way, just for kicks, sure thing on measuring the legos. preciate it! what do you think of that rim/winter tire combo? thought it looked reasonable. guy lives near ottawa and said he'd piggy back them on a work trip to concord. but i'm gonna pass so feel free....

Post by **CruiserRomey** » Tue Apr 28, 2015 5:56 pm

adamzan wrote:The Lego's are 15x7, it's the steel wheels that are 15x6. I have an extra set of legos I could measure the bore to verify for you if you like?

Chevy rims will need the bores made bigger. But funny enough, the pathy rims fit on a chevy just fine lol.

thought it was the other way around and that chevy rims had the largest centre bores? hmm...

Post by **Snafu** » Wed Apr 29, 2015 9:21 am

I do not know the specifics but I was able to get chev rims on my 1st gen frontier but they were 1" offset more than nissan (to the outside) and caused rubbing

Post by **Jayman** » Wed Apr 29, 2015 2:01 pm

Centre bore is 100.

http://www.roadkillcustoms.com/hot-rods ... z3YiqgYq2R

/\

Handy site by the way, put in your bolt pattern, and it will show you every make and model that used a rim with that same pattern, the off-set, and the centre bore of the rim for that make.

Post by **CruiserRomey** » Thu Apr 30, 2015 10:57 am

very cool site! more detailed than another one I saw. Thanks for sharing!

Canadian Nissan Truck Club

what's the centre hole bore on these nissan rims?

what's the centre hole bore on these nissan rims?

Re: what's the centre hole bore on these nissan rims?

Re: what's the centre hole bore on these nissan rims?

Re: what's the centre hole bore on these nissan rims?

Re: what's the centre hole bore on these nissan rims?

Re: what's the centre hole bore on these nissan rims?

Re: what's the centre hole bore on these nissan rims?

Re: what's the centre hole bore on these nissan rims?

Re: what's the centre hole bore on these nissan rims?

Re: what's the centre hole bore on these nissan rims?

Re: what's the centre hole bore on these nissan rims?

Connect with your social network account