Dust shields on disk brakes
- Snafu
- Moderator
- Posts: 4761
- Joined: Sun Jun 01, 2008 9:51 am
- Reactions score: 1
- Location: Fergus-Orangeville
- Make/Model: Xterra S
- Year: 2007
- Tim's: Double milk - no sugar
Dust shields on disk brakes
I am doing the brakes on the truck and noticed that the dust shield (rear) is pretty much rotted.
Anyone try to replace it or did you just rip it off because it is useless?
Replacing it does not look like an easy option unless I just cut the bad off and rivet a new one to the remains of the old.
Anyone try to replace it or did you just rip it off because it is useless?
Replacing it does not look like an easy option unless I just cut the bad off and rivet a new one to the remains of the old.
Worlds Greatest Acronym:
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
- Morpheus
- Moderator
- Posts: 4318
- Joined: Wed Apr 09, 2008 8:42 am
- Reactions score: 0
- Location: Cambridge
- Make/Model: Xterra
- Year: 2003
- Tim's: 3x3
- Contact:
Re: Dust shields on disk brakes
If you've got it torn down to the spindle, it's very little extra work from there.
Down side is they would have to be ordered.
Down side is they would have to be ordered.
- Snafu
- Moderator
- Posts: 4761
- Joined: Sun Jun 01, 2008 9:51 am
- Reactions score: 1
- Location: Fergus-Orangeville
- Make/Model: Xterra S
- Year: 2007
- Tim's: Double milk - no sugar
Re: Dust shields on disk brakes
Just have the rotors off. I think the next step would be to pull the e-brake bits to get at the bolts holding on the shield. Anything wrong without them?
I am leaving what remains on the truck but I don't think they will survive after next winter
I am leaving what remains on the truck but I don't think they will survive after next winter
Worlds Greatest Acronym:
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
- Bow_Tied
- Moderator
- Posts: 6159
- Joined: Mon Jun 02, 2008 11:20 pm
- Reactions score: 3
- Location: London
- Make/Model: Xterra P4X ZR2 Bison
- Year: '15/20
- Tim's: Medium DD
Re: Dust shields on disk brakes
This the rears? Can't speak to the X but my truck the shield is circular and doesn't fit over the axle flange - meaning you have to pull the axle. I just cut it off as I figured I'd get into replacing axles seals or goodness knows what not to mention a fluid swap. I will likely wait to do this a the next fluid maintenance interval. If I do so, I will POR 15 the new shields first!
#MoreRon
"Most of the members are people, but there are a few exceptions." - Miner
"Most of the members are people, but there are a few exceptions." - Miner
- Snafu
- Moderator
- Posts: 4761
- Joined: Sun Jun 01, 2008 9:51 am
- Reactions score: 1
- Location: Fergus-Orangeville
- Make/Model: Xterra S
- Year: 2007
- Tim's: Double milk - no sugar
Re: Dust shields on disk brakes
Yes, this is on the rears (fronts are tomorrow's 8 hour job). It looks like the shield is between the axle and the backing plate for the e-brakes. Not sure if it has to come apart or if the shield will slip out with loosened bolts. Not even sure the FSM talks about this...probably better to look at parts picture.
Worlds Greatest Acronym:
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
- Snafu
- Moderator
- Posts: 4761
- Joined: Sun Jun 01, 2008 9:51 am
- Reactions score: 1
- Location: Fergus-Orangeville
- Make/Model: Xterra S
- Year: 2007
- Tim's: Double milk - no sugar
Re: Dust shields on disk brakes
BTW I had to use a puller to get the disk off the driver's side. It was seized on good and too two tries as part of the rotor chipped off on the first attempt!
Worlds Greatest Acronym:
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
- Adam
- Moderator
- Posts: 2959
- Joined: Wed Jul 30, 2008 4:10 pm
- Reactions score: 3
- Location: Ottawa Ontario
- Make/Model: Xterra SE SC
- Year: 2002
- Tim's: Medium Regular
Re: Dust shields on disk brakes
One of mine fell off on the road last summer. I never replaced it and I don't really care. This is the front. The rears on mine are surprisingly clean with little to no rust at all. Shocking.
The ones on mine are held in with 10mm bolts. 100% chance of those breaking!
The ones on mine are held in with 10mm bolts. 100% chance of those breaking!
There is more stupidity than hydrogen in the universe, and it has a longer shelf life. -Frank Zappa
-
- Premium Member
- Posts: 878
- Joined: Sun Jun 01, 2008 7:49 pm
- Reactions score: 0
- Location: Brantford
- Make/Model: SAS Xterra
- Year: 2000
Re: Dust shields on disk brakes
Some vehicles come with dust shields, some do not, so the benefit of them is debatable, however if the vehicle was manufactured with them, I heard they must be present for a safety. I have heard of a few instances where vehicles fail a safety because of this missing/ damaged part of the braking system, even before the new rules came into effect. How will they know which vehicles do and don't have them? Generally they don't, unless it is a dealer, however if one is present, and one isn't, that's a dead give away.
- Snafu
- Moderator
- Posts: 4761
- Joined: Sun Jun 01, 2008 9:51 am
- Reactions score: 1
- Location: Fergus-Orangeville
- Make/Model: Xterra S
- Year: 2007
- Tim's: Double milk - no sugar
Re: Dust shields on disk brakes
Thanks for the info.
Worlds Greatest Acronym:
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
-
- Premium Member
- Posts: 597
- Joined: Tue Aug 25, 2015 12:00 am
- Reactions score: 0
- Location: Richmond Hill
- Make/Model: Jeep LJ
- Year: 2006
- Tim's: Large 2 cream
- Contact:
Re: Dust shields on disk brakes
On the jeep I pulled the fronts years ago with as far as I can tell zero repercussions. The brakes work fine no matter how hard it's raining so I see no issues. I left the rears as they hold the ebrake shoes.
- Snafu
- Moderator
- Posts: 4761
- Joined: Sun Jun 01, 2008 9:51 am
- Reactions score: 1
- Location: Fergus-Orangeville
- Make/Model: Xterra S
- Year: 2007
- Tim's: Double milk - no sugar
Re: Dust shields on disk brakes
On the rears it looks like there is a separate plate for the ebrakes. I presume the shield is mainly to keep water off the rotors and the rim does the same on the other side.
Now having fun with a seized slider and can't find my map-gas...doh!
Now having fun with a seized slider and can't find my map-gas...doh!
Worlds Greatest Acronym:
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
- Snafu
- Moderator
- Posts: 4761
- Joined: Sun Jun 01, 2008 9:51 am
- Reactions score: 1
- Location: Fergus-Orangeville
- Make/Model: Xterra S
- Year: 2007
- Tim's: Double milk - no sugar
Re: Dust shields on disk brakes
Stoopid rubber thingies on the sliders. Seized like a MF'r. Had to heat the bracket until the rubber melted. Why or why do they insist on these things?
Worlds Greatest Acronym:
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
- Morpheus
- Moderator
- Posts: 4318
- Joined: Wed Apr 09, 2008 8:42 am
- Reactions score: 0
- Location: Cambridge
- Make/Model: Xterra
- Year: 2003
- Tim's: 3x3
- Contact:
Re: Dust shields on disk brakes
Ah, my brain was thinking front not rear...
I've seen them removed (cut) and no real issues.
I've seen them removed (cut) and no real issues.
- Snafu
- Moderator
- Posts: 4761
- Joined: Sun Jun 01, 2008 9:51 am
- Reactions score: 1
- Location: Fergus-Orangeville
- Make/Model: Xterra S
- Year: 2007
- Tim's: Double milk - no sugar
Re: Dust shields on disk brakes
You must be a boobie man
Worlds Greatest Acronym:
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
- Morpheus
- Moderator
- Posts: 4318
- Joined: Wed Apr 09, 2008 8:42 am
- Reactions score: 0
- Location: Cambridge
- Make/Model: Xterra
- Year: 2003
- Tim's: 3x3
- Contact:
- buttsy
- Moderator
- Posts: 916
- Joined: Tue Apr 21, 2009 12:34 pm
- Reactions score: 0
- Location: Sudbury, ON
- Make/Model: Xterra 4x4 SC
- Year: 2004
- Tim's: L 1c
Re: Dust shields on disk brakes
I'd get that looked at if I were you...Morpheus wrote:My ball joints have nipples.Snafu wrote:You must be a boobie man
Sent from my SM-G870W using Tapatalk
I can wire anything directly into anything... I'm the PROFESSOR
- Snafu
- Moderator
- Posts: 4761
- Joined: Sun Jun 01, 2008 9:51 am
- Reactions score: 1
- Location: Fergus-Orangeville
- Make/Model: Xterra S
- Year: 2007
- Tim's: Double milk - no sugar
Re: Dust shields on disk brakes
lol...it's not real unless there are pics!
Worlds Greatest Acronym:
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
- Morpheus
- Moderator
- Posts: 4318
- Joined: Wed Apr 09, 2008 8:42 am
- Reactions score: 0
- Location: Cambridge
- Make/Model: Xterra
- Year: 2003
- Tim's: 3x3
- Contact:
Re: Dust shields on disk brakes
You might not like what you see...Snafu wrote:lol...it's not real unless there are pics!
- Snafu
- Moderator
- Posts: 4761
- Joined: Sun Jun 01, 2008 9:51 am
- Reactions score: 1
- Location: Fergus-Orangeville
- Make/Model: Xterra S
- Year: 2007
- Tim's: Double milk - no sugar
Re: Dust shields on disk brakes
You are right but it still is not real until there is a pic :p
Eye bleach is on stand by
Eye bleach is on stand by
Worlds Greatest Acronym:
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
- Adam
- Moderator
- Posts: 2959
- Joined: Wed Jul 30, 2008 4:10 pm
- Reactions score: 3
- Location: Ottawa Ontario
- Make/Model: Xterra SE SC
- Year: 2002
- Tim's: Medium Regular
Re: Dust shields on disk brakes
There is more stupidity than hydrogen in the universe, and it has a longer shelf life. -Frank Zappa