Canadian Nissan Truck Club

My list of things to do on my Xterra is ever growing , i need new tires , new Lower control arms with Ball joints , Install Roof boobs , Repaint the rear bumper , repaint the sliders , oil change , figure out why Bullydog is not communicating anymore . and i am sure more to come .

i can also get them through my company

I also sell them

You should keep track of how long they last in terms of km. Mine usually last around 50k and my truck is not light either, I tow a trailer frequently, and I live downtown. What brand of pads are you using? Also inspect the boot or rubber seal around the caliper piston. I have had it happen where he...

Agreed. Are the pads moving freely upon install? That is a short time between pad replacements. Are you sure you don't have sticking calipers? Or are you doing crazy amounts of mileage? The pads on the truck typically last me 30-50k. Yes each time i do the pads i do the servicing on the guide pins ...

I just did new rotors and pads all the way around , but i have some rubbing on the front passenger side now, need to have a look. Aside from that its great to have brakes again , sucks i have to change front pads 2 times a year lol

Bow_Tied wrote:Maybe something like this https://www.youtube.com/watch?v=63M0ofyLUkU

Definitly , i do like the ZR2 bison , also like the ranger raptor .

Oil Changes on all 3 vehicles brakes on all three plus work on the back of the X where we touched the tree last year. Oh yeah, oil changes. Did the X last night. 4 more to go.... I need to do a brake job , check all wheel hubs , suspension , oil change . and some electrical work. aside from that it...

I need to do a brake job , check all wheel hubs , suspension , oil change . and some electrical work. aside from that its in good shape ... now if i could manage to get out camping more this year ... thats another question lol

Installed my helper springs last night , still do to some wireing for lights , and a Compressor and tank install.

I think the primary thing needs to be more trail leaders... 100%. No matter how organized the admin/planning committee is, this is an issue - yes we can do better, but there are limits: 1) we are all on vacation so this isn't supposed to be a high pressure timetable, however I agree it would be nic...

I think the primary thing needs to be more trail leaders , so that trails can get started somewhat close to on time and have someone responsible for that particular group , if someone signed up and isnt at the meeting place roughly on time , then they dont go to that trail . but trail leaders are ne...

Just to further this discussion , Creating a bracket to work with a different alternator is a non issue , its actually easy . Lining it up also easy as it goes in the same place as the original alternator , just with a adaptor plate for mounting it. The pully itself on the other hand i beleive the a...

I just want to throw my name in the hat to make stickers for the club , as i have the equipment . A little about what i can and can't . I can't do Printed decals . I have a vinyl cutter , so i can do single color , and depending on the design 2 colors ( more labour for me to apply one color then a s...

Yea atleast 2 of us Ottawa folks volunteered to help , i have a garage and tools , what i don't have is the experience on the 2nd Gen , so it would be nice to have someone who knows a little more what they are doing than me. i can wing it with the best of them but i don't wanna screw up a body lift

I found something that may interest some of you and not so much others but here ya go .

http://www.carid.com/husky-liners/long- ... 17051.html

http://www.carid.com/husky-liners/husky ... 48146.html

Pics? You could get a piece of aluminum angle from HD and rivet it to the shelf at the back. Give it a bit of strength. That i did not , Every set if instructions never said anything about that , but it makes to sense to add something there to give the back end strength . i have pics , but too hung...

so i did a lobo shelf today , and i call bs on everyone who says its like 10 min to do. i spent and hour and i don't like the lack of support in the middle .

How boo-boo'd? All four corners got new stuff on today. Cleaned up underneath (blasted some, painted others, rust-proofed hard to reach areas). Took a while but it looks good. Let's hope it stops. SMOD mod for another day :( Both Nuts that compress the Strut top hat and spring are seized on and can...

Did my 2" lift kit on the 15 Xterra , AAL on the back and In Coil spacer for the fronts , however i boo booed on the fronts so looking to replace them