Canadian Nissan Truck Club

When I did mine I ran the wires up the passenger side a-piller and then I did drill through the roof but through the base of the roof rack. That way I could apply paint and silicone sealant underneath the foot of the roof rack and make it look clean.

SarnX.

Congrats.

SarnX.

Welcome back.

SarnX.

Welcome aboard.

SarnX.

For my 00 XE, as per FSM: Transfer case - 2.2 L Synchromax Front Diff - 1.5 L Max Gear 75W90 Read Diff - 2.8 L Max Gear 75W90 The 02 S/C should be the same; maybe someone else can confirm Those are the volumes I use. They are fully compatible with the LSD. I got mine in Guelph at: Performance Impro...

Royal Purple Max Gear 75-90 for diffs and manual tranny and the Royal Purple Synchromax for the transfer case.

SarnX.

Congrats. It is a very exciting, and tiring time.

Good luck,

SarnX.

I have the Gaugepods one mounted in my '02 with the tweeters. No issues with visibility, no issues with install even the tweeter. They look great and match paint and texture nicely.

SarnX.

Sorry to see you go but I understand that family comes first.

I have, from time to time, considered getting rid of the beast but I would never get enough for it and I do still love driving it.

SarnX.

My SES light never came on with this code though. It was only visible on my Scangauge.

Is that the only code you are getting?

SarnX.

Your Scangauge will take a while to understand this problem - it doesn't read your fuel flow, it looks at how many miles you've done and what amount of fuel you loaded it with. Since you got it god knows when, and have it programmed to the truck, you've adjusted a parameter that it isn't able to &q...

Thanks again Scott.

Well I haven't posted a code now in over a week. As far as my Scanguage goes I am not seeing any difference in the mileage but I will wait a few tanks to see if I am getting more km's per tank.

SarnX.

I think you need to change the positive and negative on the knock sensor...this, I think was identical to what happened to Scotto and I when we did mine. I swapped the wires and that appears to have solved the problem. Thanks Bender :thumbup: I will keep you posted after a lengthier test run. SarnX.

Okay I finally got around to trying this mod of relocating the Knock Sensor. I finished the mod as outlined in another post (Very good post) which appears to have cleared the P0328 code but now I have the P0327 Code which my book still says is a Knock Sensor issue. Anyone have any info and/or experi...

Congrats. It is a very satisfying feeling.

SarnX.

Congrats. I just can't believe you have a daughter going to Uni.

As for the best business school... Ivey.

SarnX.

Happy Birthday.

SarnX.

Happy Birthday.

SarnX.

Happy Birthday!

SarnX.

Welcome aboard.

SarnX.