Canadian Nissan Truck Club

Welcome to the club!

Howdy!

Thanks for your reply, appreciate it! I don't tow anything, never have heavy load in back cargo area, or rear passengers. So without the load sensing valve, and no weight on the back end, I've heard that the rear brakes will start to lock up... If this does in fact happen, it could potentially be a...

Yes, people did it all the time. The only thing the valve does is increase/decrease the pressure to the rear brakes depending on how much squat the rear of the truck had (how much load in it)

You can buy a whole spring pack and install yourself, but you could also just go to a local spring shop and have them replace the broken leaf.
You should also check the shocks. The reason the leaf springs sometimes break is that the shocks are blown and cause the springs to over-work themselves.

If the message shows in your inbox still, that just means the person you sent it to hasn't read it yet.

I've PM'ed you back!

Drizit wrote:It's simple, Morphious was disconnected from the matrix years ago, but we will find him...

I think I took the wrong pill...

PC704 - MY2019 Frontier & MY2019 NV ***** Quality Action Summary ***** Nissan is conducting a quality action on 237 specific MY 2019 Frontier and NV vehicles identified in NOA, to remove and inspect the engine crankshaft counterweight surface for an impact mark. ***** What Dealers Should Do ****...

Welcome to the club.

The only legal trails in the area that are open during the winter are on private land.

A popular one is Rays Place in Minden Hills.

Welcome to the club!

Unfortunately the rotted radiator support is a common issue on the 1st gen's, but it's a fairly easy repair if you have the right equipment.

x2 for dead spot in the starter. Mine does that sometimes too.

When I had my R50 I found that there was quite a bit of vibration from the front. One thing that really helped for me was switching to manual Warn hubs to release the front drivetrain when 4x4 is not in use. You can test this before spending the money on the manual hubs by just removing the drive fl...

Sorry for the delay Craisy Daisy, you should be all set now. The code for OF4wd is in the email that you received from us near the bottom. We haven't got all the manuals loaded yet, it's a work in progress. If there's something you're looking for that's not there, just message me and I can get it fo...

PM sent

Only a few R50's still running around, but someone just need one.

Would be about $150 in labor, plus parts.
Oem or aftermarket?

The chain and crank are all 1 unit, but you're probably best to try a pick and pull yourself wrecking yard, or just throw It on the roof rack and tying it down.

New they're $240+tax.

Nothing in the Canadian market for this recall at this time, but that doesn't mean there might be one still coming.

Thanks Morpheus. The idle is fine all the time, with the exception of that first 2 seconds after the first start of the day. The base idle can still be a source, as everything is based off that initial setting. Cleaning the MAF, and the throttle body is a good start, then setting the base idle and ...

Probably needs the base idle adjusted, which iirc on an 06 needs to be done with a diagnostic tool.

26 is gold!