Finally...getting the lift - Part II
-
sandor
- Premium Member
- Posts: 878
- Joined: Sun Jun 01, 2008 7:49 pm
- Reactions score: 0
- Location: Brantford
- Make/Model: SAS Xterra
- Year: 2000
Re: Finally...getting the lift - Part II
There's some extra material for proper adjustment of the arm that links the opener to the door; half a minute with a cutoff disc and there will be enough clearance. The other side has been clearanced already, but I haven't pulled it in or out of that side post lift, so I have to see if it has been clearanced enough.
I'll take some pix after work tonight and post them up. The truck is in getting an alignment today, so lets hope there is some light left after I get it home.
I'll take some pix after work tonight and post them up. The truck is in getting an alignment today, so lets hope there is some light left after I get it home.
-
sandor
- Premium Member
- Posts: 878
- Joined: Sun Jun 01, 2008 7:49 pm
- Reactions score: 0
- Location: Brantford
- Make/Model: SAS Xterra
- Year: 2000
Re: Finally...getting the lift - Part II
Back from alignment...drives a whole lot better, AND It fits in the pizza n beer side just fine, lots of room to spare.
As promised...
...and yes Dave, I did really pinstripe those wheels red pinstriping. Stock steel Xterra wheels, painted black with red (and silver) pinstripes. I have a lot of time on my hands.
As promised...
...and yes Dave, I did really pinstripe those wheels red pinstriping. Stock steel Xterra wheels, painted black with red (and silver) pinstripes. I have a lot of time on my hands.
-
HotWod
- Don't follow me, you wont make it.
- Posts: 1047
- Joined: Sat Feb 14, 2009 12:59 pm
- Reactions score: 0
- Location: Grimsby, Ontario
- Make/Model: Pathfinder LE
- Year: 1998
- Tim's: Coffee!
Re: Finally...getting the lift - Part II
Looks good dude!
"I believe Chevy's are like tampons, every pussy has one" - Unknown Wiseman
-
rush356
- I've used 4-lo
- Posts: 577
- Joined: Sun Jun 01, 2008 12:09 am
- Reactions score: 0
- Location: This planet
- Make/Model: Xterra S
- Year: 2006
- Tim's: Coffee L DD
Re: Finally...getting the lift - Part II
nice job
If you have nothing good to say don't say anything at all.
-
dududuckling
- Don't follow me, you wont make it.
- Posts: 1348
- Joined: Sun Feb 01, 2009 12:21 am
- Reactions score: 0
- Location: Santa Barbara, CA
- Make/Model: Pathfinder SE
- Year: 2002
- Tim's: Iced Coffee
- Contact:
Re: Finally...getting the lift - Part II
Nice, Sandor...
2002 Nissan Pathfinder SE
2000 Nissan Pathfinder SE
2000 Nissan Pathfinder SE
-
Bow_Tied
- Moderator
- Posts: 6160
- Joined: Mon Jun 02, 2008 11:20 pm
- Reactions score: 4
- Location: London
- Make/Model: Xterra P4X ZR2 Bison
- Year: '15/20
- Tim's: Medium DD
Re: Finally...getting the lift - Part II
Coolamundo!!
What is the next mod?
What is the next mod?
#MoreRon
"Most of the members are people, but there are a few exceptions." - Miner
"Most of the members are people, but there are a few exceptions." - Miner
-
steelcityslicker
- Don't follow me, you wont make it.
- Posts: 1029
- Joined: Fri Jun 12, 2009 12:40 am
- Reactions score: 0
- Location: The Big Smoke
- Make/Model: Xterra SE
- Year: 2000
- Tim's: Coffee is good.
Re: Finally...getting the lift - Part II
Pete,
Your truck looks great man!! I really like your new back bumper. I can't believe how much that opens up the departure angle. Sorry man, I may have to copy you on that one or at least find something that's gonna get the same results. Did they give you a pull rating with that hitch?
Your truck looks great man!! I really like your new back bumper. I can't believe how much that opens up the departure angle. Sorry man, I may have to copy you on that one or at least find something that's gonna get the same results. Did they give you a pull rating with that hitch?
Last edited by steelcityslicker on Wed Feb 10, 2010 12:34 am, edited 1 time in total.
"Certainly there is no hunting like the hunting of man and those who have hunted armed men long enough and liked it, never really care for anything else thereafter". - Hemingway
-
Nd4SpdSe
- Premium Member
- Posts: 2348
- Joined: Sat Jul 05, 2008 10:29 pm
- Reactions score: 1
- Location: Québec / Niagara
- Make/Model: Pathfinder V8
- Year: 2008
- Tim's: Ice Cap Supreme
- Contact:
Re: Finally...getting the lift - Part II
Looking great! Is that a bender built back bumper?
2008 Nissan Pathfinder LE - VK56 V8 Power
2001 Nissan Frontier CC SB - Offroad Trailer
2003 Nissan Xterra SE - 5-Speed Supercharged
2001 Nissan Frontier CC SB - Offroad Trailer
2003 Nissan Xterra SE - 5-Speed Supercharged
-
Simon
- Moderator
- Posts: 4087
- Joined: Sat Feb 02, 2008 10:42 am
- Reactions score: 0
- Location: Brampton, Ontario
- Make/Model: Nissan Maxima
- Year: 2011
- Tim's: XL COFFEE ! 1M 1S
- Contact:
Re: Finally...getting the lift - Part II
Looking good Pete! 
"CAUTION: Hot shovel in close proximity to my person"-Bow_Tied
-
sandor
- Premium Member
- Posts: 878
- Joined: Sun Jun 01, 2008 7:49 pm
- Reactions score: 0
- Location: Brantford
- Make/Model: SAS Xterra
- Year: 2000
Re: Finally...getting the lift - Part II
Its supposed to be equivalent to a class III hitch (5000 lbs). Even if it isn't rated at that, that's fine, the truck only has a 3500 lb towing capacity. Yeah, it has a great departure angle.
Not Bender built; it was an in-stock part from AC, manufactured by Skid Row, shipped to just across the border, and picked up by me.
It has provisions for a swing arm, which may or may not be Bender built, Bender advised or Bender approved, with the possibly of lowridah313 elements. We'll see.
Not Bender built; it was an in-stock part from AC, manufactured by Skid Row, shipped to just across the border, and picked up by me.
It has provisions for a swing arm, which may or may not be Bender built, Bender advised or Bender approved, with the possibly of lowridah313 elements. We'll see.
-
Rev
- Don't follow me, you wont make it.
- Posts: 1868
- Joined: Mon Jun 23, 2008 9:01 pm
- Reactions score: 0
- Location: Toronto
- Make/Model: Xterra SE
- Year: 2008
- Tim's: Hot chocolate
- Contact:
Re: Finally...getting the lift - Part II
That looks so great! love the height your new bumper gives. The very first time I ever went wheeling we followed you. We watched you bang that old hitch off of everything. And we used your truck as a guide, ie. if he can make it we sure can... not anymore! two thumbs up!
-
offroadaction
- Newbie
- Posts: 22
- Joined: Tue Jan 05, 2010 10:58 am
- Reactions score: 0
- Location: Toronto
- Make/Model: Umm...yeah...
- Year: 1972
- Contact:
Re: Finally...getting the lift - Part II
Looks great!
Wes Kibble
http://www.bajanorth.ca" onclick="window.open(this.href);return false;
http://www.bajanorth.ca" onclick="window.open(this.href);return false;
-
x-fisher
- Lugnut
- Posts: 51
- Joined: Thu Dec 24, 2009 10:58 pm
- Reactions score: 0
- Location: Toronto
- Make/Model: Xterra SE
- Year: 2003
- Tim's: milk or water
Re: Finally...getting the lift - Part II
Truck looks awesome, I really like the look of those rims.
Dieter
-
Jayman
- Moderator
- Posts: 4779
- Joined: Sun Jun 01, 2008 5:18 pm
- Reactions score: 0
- Location: Ottawa
- Make/Model: 4x4 Xterra - SC JE
- Year: 2002
- Tim's: Double Double
- Contact:
Re: Finally...getting the lift - Part II
Looks great Pete!
CNTC Pyro Team Captain. Signaling the International Space Station, one bucket at a time.