VK56DE (5.6L Titan) Headers
- Miner
- Don't follow me, you wont make it.
- Posts: 3375
- Joined: Sun Jun 01, 2008 1:19 am
- Reactions score: 0
- Location: Kingston
- Make/Model: Cummins 2500 HD
- Year: 2012
- Tim's: McD's 3C1S
Re: VK56DE (5.6L Titan) Headers
Against my wifes wishes I think I'll tackle the install myself. I'd jump on $200 or a Titan Wrenching Meet up there but I don't like the idea of working on the truck 3-4 hours from home. At home I have the time to run to Nissan/Napa/etc if hardware breaks or if gaskets are missing, and my car to drive if the truck is down for a couple days.
Got an update from Amazon this morning, my $514 JBA Titanium Long Tubes that where supposed to be in stock (directly from Amazon) are not in stock and won't ship for weeks...maybe a month... Not impressed, I bought from Amazon because they always have shipped on time, at or near the lowest price available.
Jeff at Cajun B-Pipes is awesome, he emailed late last night saying my pipes were done and gave me my ups shipping number and invoice. I emailed him at 6:30 this morning asking about packaging with a JBA and he emailed me back at 8:30, should ship today. To give you an idea of how on the ball this guy is I ordered the pipes first thing Tuesday, he brought in the cats, built the pipes and shipped in 48-72 hours, he responds to emails at night and before 7:30 (Central Time), and he gets it right. Also at $550 for the JBAs including shipping he is $17 less then Amazon after you add in their fees and taxes...however the PayPal fee will make it break even.
Luke what is your plan for tuning, or are you FlexFuel?
Got an update from Amazon this morning, my $514 JBA Titanium Long Tubes that where supposed to be in stock (directly from Amazon) are not in stock and won't ship for weeks...maybe a month... Not impressed, I bought from Amazon because they always have shipped on time, at or near the lowest price available.
Jeff at Cajun B-Pipes is awesome, he emailed late last night saying my pipes were done and gave me my ups shipping number and invoice. I emailed him at 6:30 this morning asking about packaging with a JBA and he emailed me back at 8:30, should ship today. To give you an idea of how on the ball this guy is I ordered the pipes first thing Tuesday, he brought in the cats, built the pipes and shipped in 48-72 hours, he responds to emails at night and before 7:30 (Central Time), and he gets it right. Also at $550 for the JBAs including shipping he is $17 less then Amazon after you add in their fees and taxes...however the PayPal fee will make it break even.
Luke what is your plan for tuning, or are you FlexFuel?
Cummins - Zone, BD, AFE, Yokohama, Bestop, Access, VisonX, H&S
Simon wrote:It's not like the membership voted under control of a heavy hand...
Dammit, I've said too much...I'll have to ban you now
- Miner
- Don't follow me, you wont make it.
- Posts: 3375
- Joined: Sun Jun 01, 2008 1:19 am
- Reactions score: 0
- Location: Kingston
- Make/Model: Cummins 2500 HD
- Year: 2012
- Tim's: McD's 3C1S
Re: VK56DE (5.6L Titan) Headers
My wonderful bride added a little something extra as an early fathers day gift...
Cummins - Zone, BD, AFE, Yokohama, Bestop, Access, VisonX, H&S
Simon wrote:It's not like the membership voted under control of a heavy hand...
Dammit, I've said too much...I'll have to ban you now
- Jayman
- Moderator
- Posts: 4779
- Joined: Sun Jun 01, 2008 5:18 pm
- Reactions score: 0
- Location: Ottawa
- Make/Model: 4x4 Xterra - SC JE
- Year: 2002
- Tim's: Double Double
- Contact:
Re: VK56DE (5.6L Titan) Headers
Sweet!
You putting that in before this weekend?
You putting that in before this weekend?
CNTC Pyro Team Captain. Signaling the International Space Station, one bucket at a time.
- Miner
- Don't follow me, you wont make it.
- Posts: 3375
- Joined: Sun Jun 01, 2008 1:19 am
- Reactions score: 0
- Location: Kingston
- Make/Model: Cummins 2500 HD
- Year: 2012
- Tim's: McD's 3C1S
Re: VK56DE (5.6L Titan) Headers
No, ordered everything a week too late for that. This weekend I'll be sporting the cracked manifold mod, hopefully it doesn't get much worse.
Cummins - Zone, BD, AFE, Yokohama, Bestop, Access, VisonX, H&S
Simon wrote:It's not like the membership voted under control of a heavy hand...
Dammit, I've said too much...I'll have to ban you now
- Jayman
- Moderator
- Posts: 4779
- Joined: Sun Jun 01, 2008 5:18 pm
- Reactions score: 0
- Location: Ottawa
- Make/Model: 4x4 Xterra - SC JE
- Year: 2002
- Tim's: Double Double
- Contact:
Re: VK56DE (5.6L Titan) Headers
I know how that one goes.Miner wrote:No, ordered everything a week too late for that. This weekend I'll be sporting the cracked manifold mod, hopefully it doesn't get much worse.
No big deal if it does get worse, you already have headers on the way, so...
(this post broke the tie by the way - 4405 with this one)
CNTC Pyro Team Captain. Signaling the International Space Station, one bucket at a time.
- Miner
- Don't follow me, you wont make it.
- Posts: 3375
- Joined: Sun Jun 01, 2008 1:19 am
- Reactions score: 0
- Location: Kingston
- Make/Model: Cummins 2500 HD
- Year: 2012
- Tim's: McD's 3C1S
Re: VK56DE (5.6L Titan) Headers
Pickup EVERYTHING tomorrow, probably start with the intake and work my way back...feels like Duckmas Eve!
Cummins - Zone, BD, AFE, Yokohama, Bestop, Access, VisonX, H&S
Simon wrote:It's not like the membership voted under control of a heavy hand...
Dammit, I've said too much...I'll have to ban you now
- Miner
- Don't follow me, you wont make it.
- Posts: 3375
- Joined: Sun Jun 01, 2008 1:19 am
- Reactions score: 0
- Location: Kingston
- Make/Model: Cummins 2500 HD
- Year: 2012
- Tim's: McD's 3C1S
Re: VK56DE (5.6L Titan) Headers
No time to work on the truck! Might run some cipher logs tonight before and after the intake....if I get the grass cut...
Looking at the header install and comparing the JBA instructions to Nissan's. Does Nissan still suggest removing the intake, the rad and the four back header studs, or do they do it the JBA way now? JBA supports the motor, removes the motor mount on one side, jacks the motor 1 inch and then repeats on the other side.
Looking at the header install and comparing the JBA instructions to Nissan's. Does Nissan still suggest removing the intake, the rad and the four back header studs, or do they do it the JBA way now? JBA supports the motor, removes the motor mount on one side, jacks the motor 1 inch and then repeats on the other side.
Cummins - Zone, BD, AFE, Yokohama, Bestop, Access, VisonX, H&S
Simon wrote:It's not like the membership voted under control of a heavy hand...
Dammit, I've said too much...I'll have to ban you now
- Miner
- Don't follow me, you wont make it.
- Posts: 3375
- Joined: Sun Jun 01, 2008 1:19 am
- Reactions score: 0
- Location: Kingston
- Make/Model: Cummins 2500 HD
- Year: 2012
- Tim's: McD's 3C1S
Re: VK56DE (5.6L Titan) Headers
Cummins - Zone, BD, AFE, Yokohama, Bestop, Access, VisonX, H&S
Simon wrote:It's not like the membership voted under control of a heavy hand...
Dammit, I've said too much...I'll have to ban you now
-
- Don't follow me, you wont make it.
- Posts: 1194
- Joined: Mon Jun 16, 2008 12:18 am
- Reactions score: 0
- Location: Brantford Canada
- Make/Model: Nissan Titan
- Year: 2006
- Tim's: Double cream
- Miner
- Don't follow me, you wont make it.
- Posts: 3375
- Joined: Sun Jun 01, 2008 1:19 am
- Reactions score: 0
- Location: Kingston
- Make/Model: Cummins 2500 HD
- Year: 2012
- Tim's: McD's 3C1S
Re: VK56DE (5.6L Titan) Headers
Okay so next week it is going all on at once. I'll run a cipher log before and after. I had planned to log Stock Cold (leaking headers), Stock Hot (headers seal a bit), Stock with AirRaid Hot, and "All In". This will be faster, with no real usable information.
Cummins - Zone, BD, AFE, Yokohama, Bestop, Access, VisonX, H&S
Simon wrote:It's not like the membership voted under control of a heavy hand...
Dammit, I've said too much...I'll have to ban you now
- Miner
- Don't follow me, you wont make it.
- Posts: 3375
- Joined: Sun Jun 01, 2008 1:19 am
- Reactions score: 0
- Location: Kingston
- Make/Model: Cummins 2500 HD
- Year: 2012
- Tim's: McD's 3C1S
Re: VK56DE (5.6L Titan) Headers
Nismojunky wrote:No rad i did intake and yes undo motor mounts and jack ot up
JBA Long Tubes completely cover/block access to the the back bolt of the engine mount (frame side) ... @#^%$&*%%$&*!
I hate directions that a written in the wrong order!
Cummins - Zone, BD, AFE, Yokohama, Bestop, Access, VisonX, H&S
Simon wrote:It's not like the membership voted under control of a heavy hand...
Dammit, I've said too much...I'll have to ban you now
- Jayman
- Moderator
- Posts: 4779
- Joined: Sun Jun 01, 2008 5:18 pm
- Reactions score: 0
- Location: Ottawa
- Make/Model: 4x4 Xterra - SC JE
- Year: 2002
- Tim's: Double Double
- Contact:
Re: VK56DE (5.6L Titan) Headers
Bah, it's just a few extra steps.
The first attempt was only a trial run anyways, right?
The first attempt was only a trial run anyways, right?
CNTC Pyro Team Captain. Signaling the International Space Station, one bucket at a time.
- Miner
- Don't follow me, you wont make it.
- Posts: 3375
- Joined: Sun Jun 01, 2008 1:19 am
- Reactions score: 0
- Location: Kingston
- Make/Model: Cummins 2500 HD
- Year: 2012
- Tim's: McD's 3C1S
Re: VK56DE (5.6L Titan) Headers
Yeah, 8 hours learning on the right side, 2 hours for the left side...hopefully.
What I've learned: patience, persistence, WTF do you mean the instructions are wrong, persistence, persistence, more tools are always needed, and extractors are your friend.
What I've learned: patience, persistence, WTF do you mean the instructions are wrong, persistence, persistence, more tools are always needed, and extractors are your friend.
Cummins - Zone, BD, AFE, Yokohama, Bestop, Access, VisonX, H&S
Simon wrote:It's not like the membership voted under control of a heavy hand...
Dammit, I've said too much...I'll have to ban you now
- Miner
- Don't follow me, you wont make it.
- Posts: 3375
- Joined: Sun Jun 01, 2008 1:19 am
- Reactions score: 0
- Location: Kingston
- Make/Model: Cummins 2500 HD
- Year: 2012
- Tim's: McD's 3C1S
Re: VK56DE (5.6L Titan) Headers
Borla is on, sounds awesome...over the phone...my better half took it in.
Might even post a video, its sounds good enough to justify a youtube account.
Might even post a video, its sounds good enough to justify a youtube account.
Cummins - Zone, BD, AFE, Yokohama, Bestop, Access, VisonX, H&S
Simon wrote:It's not like the membership voted under control of a heavy hand...
Dammit, I've said too much...I'll have to ban you now
- Miner
- Don't follow me, you wont make it.
- Posts: 3375
- Joined: Sun Jun 01, 2008 1:19 am
- Reactions score: 0
- Location: Kingston
- Make/Model: Cummins 2500 HD
- Year: 2012
- Tim's: McD's 3C1S
Re: VK56DE (5.6L Titan) Headers
lookzcustoms wrote:ok JBA LT and cajun b-pipes ($750 shipped to CDI) on the way, just did my muffler today, just a flowmaster
ok Rob lets get this buddy of your going tell him he gonna be busy with 2 header installs
with my phone, but i can hear a leak in the front
http://www.youtube.com/watch?v=hzuBt_-J5iI
And...
Cummins - Zone, BD, AFE, Yokohama, Bestop, Access, VisonX, H&S
Simon wrote:It's not like the membership voted under control of a heavy hand...
Dammit, I've said too much...I'll have to ban you now
- Miner
- Don't follow me, you wont make it.
- Posts: 3375
- Joined: Sun Jun 01, 2008 1:19 am
- Reactions score: 0
- Location: Kingston
- Make/Model: Cummins 2500 HD
- Year: 2012
- Tim's: McD's 3C1S
Re: VK56DE (5.6L Titan) Headers
Logged this morning:
No video yet, or pics. Maybe at lunch today.
- Equaled the trucks previous best 0-60; therefore the Borla hasn't hurt performance
- Improved the trucks previous best 0-60 in this tune; therefore the Borla may improve performance
- First scan of the log shows the trucks AFR has a wider range, but still a little rich (12.0 vs 12.7); this leads me to believe that more output is available by fine tuning the tune(s)
No video yet, or pics. Maybe at lunch today.
Cummins - Zone, BD, AFE, Yokohama, Bestop, Access, VisonX, H&S
Simon wrote:It's not like the membership voted under control of a heavy hand...
Dammit, I've said too much...I'll have to ban you now
- Adam
- Moderator
- Posts: 2962
- Joined: Wed Jul 30, 2008 4:10 pm
- Reactions score: 3
- Location: Ottawa Ontario
- Make/Model: Xterra SE SC
- Year: 2002
- Tim's: Medium Regular
Re: VK56DE (5.6L Titan) Headers
Must be nice to be able to monitor things. I had to just throw the headers and exhaust on and hope for the best lol.
There is more stupidity than hydrogen in the universe, and it has a longer shelf life. -Frank Zappa
- Jayman
- Moderator
- Posts: 4779
- Joined: Sun Jun 01, 2008 5:18 pm
- Reactions score: 0
- Location: Ottawa
- Make/Model: 4x4 Xterra - SC JE
- Year: 2002
- Tim's: Double Double
- Contact:
Re: VK56DE (5.6L Titan) Headers
Lol, same...adamzan wrote:Must be nice to be able to monitor things. I had to just throw the headers and exhaust on and hope for the best lol.
Although, I've always wanted a ScanGauge or something similar so that I could monitor things like that.
CNTC Pyro Team Captain. Signaling the International Space Station, one bucket at a time.
- Miner
- Don't follow me, you wont make it.
- Posts: 3375
- Joined: Sun Jun 01, 2008 1:19 am
- Reactions score: 0
- Location: Kingston
- Make/Model: Cummins 2500 HD
- Year: 2012
- Tim's: McD's 3C1S
Re: VK56DE (5.6L Titan) Headers
I'd still like a ScanGauge. It isn't practical to have a laptop running in the passenger seat all the time. It is nice to have the diagnostic capability though.
I'm not sure if Cipher will work for unsupported ECUs, its basically 03+ 350Z, 04+ Titan and Armada, 04+ Murano, 05+ Frontier and Xterra. We can see if it will connect and read on previous generations, but I wouldn't expect anything.
NismoJunky told me about these today, it would allow me to constantly monitor AFR(s).
I'm not sure if Cipher will work for unsupported ECUs, its basically 03+ 350Z, 04+ Titan and Armada, 04+ Murano, 05+ Frontier and Xterra. We can see if it will connect and read on previous generations, but I wouldn't expect anything.
NismoJunky told me about these today, it would allow me to constantly monitor AFR(s).
Cummins - Zone, BD, AFE, Yokohama, Bestop, Access, VisonX, H&S
Simon wrote:It's not like the membership voted under control of a heavy hand...
Dammit, I've said too much...I'll have to ban you now