Canadian Nissan Truck Club

Posted: **Thu Oct 02, 2014 9:07 am**

I found mortonm posted this on Expedition Portal. It looks to be a skid place for the transfer case it looks like, and for only $40.

Skid Plate Part # 30409-33G00
Bolts 2 x 33201-33G10
2 x 08121-0201E

The two bolts have different sized threads, but both have 14mm heads on them. There are three bolts on the driver side, and one is accessed from the passenger side

Drive Side #3 Bit of a note for this one, at least for Xterra Drivers. The manual transfer case linkage blocks easy access to the threaded hole, you can get the bolt started but there isnt enough room to get a ratchet on it. Just shift into 4HI and the linkage will move out of the way enough to allow easy access.

http://www.expeditionportal.com/forum/t ... ping+stove

Posted: **Thu Oct 02, 2014 12:13 pm**

I have one. Cheap insurance.

Posted: **Thu Oct 02, 2014 1:06 pm**

I cant tell from the pics, but it is for the trans or tcase?

Posted: **Thu Oct 02, 2014 1:10 pm**

T-case.

Posted: **Thu Oct 02, 2014 11:59 pm**

I have two. Ones in the garage. Free to any member here.

Posted: **Fri Oct 03, 2014 12:03 am**

Can I pick it up with my hatch trim?

This post has been written entirely in recycled electrons by a bonehead on a Galaxy S4. Also from inside an igloo. Why not, I'm from the "North" right?

Posted: **Thu Oct 23, 2014 11:56 am**

You would think that the holes would catch on everything on that skidplate

Canadian Nissan Truck Club

Cheap OEM T-Case Skid?

Cheap OEM T-Case Skid?

Re: Cheap OEM T-Case Skid?

Re: Cheap OEM T-Case Skid?

Re: Cheap OEM T-Case Skid?

Re: Cheap OEM T-Case Skid?

Re: Cheap OEM T-Case Skid?

Re: Cheap OEM T-Case Skid?