Page 2 of 2
Re: Body lifts on 2nd Gen
Posted: Thu Sep 08, 2016 11:10 am
by BigRed44
no all i had to do was cut the old bracket 2 inches shorter and drill 2 new holes(still not installed on the truck)
Re: Body lifts on 2nd Gen
Posted: Thu Sep 22, 2016 12:42 pm
by PhullD
Did you need the extended rad hose? I read some people saying it has enough slack. Rook gave Napa Part # 8978, is this where you got yours?
Re: Body lifts on 2nd Gen
Posted: Thu Sep 22, 2016 1:21 pm
by BigRed44
Yeh I got it from Napa and I needed it some might not
Sent from my iPhone using Tapatalk
Re: Body lifts on 2nd Gen
Posted: Fri Sep 23, 2016 10:41 pm
by Snafu
When you did your body lift do you recall if there was any room to move the body left and right? I just noticed that the tires on the driver side of the truck are out farther than the passenger side. It seems the whole body needs to move over about 1/2".
Re: Body lifts on 2nd Gen
Posted: Fri Sep 23, 2016 11:02 pm
by BigRed44
I never had any issue with body shift mine was pretty centred
Sent from my iPhone using Tapatalk
Re: Body lifts on 2nd Gen
Posted: Fri Sep 23, 2016 11:21 pm
by PhullD
Haha snafu yours was built on a Friday!
Re: Body lifts on 2nd Gen
Posted: Sat Sep 24, 2016 8:42 am
by Snafu
Yeah, probably a long-weekend Friday build.
@Alex - thanks. by the sounds of it there is no wiggle room or you would have had to line up the body.