Page 1 of 1
Gen1 X Clearing 33s - Fender Side
Posted: Sun Apr 24, 2016 8:16 am
by Nd4SpdSe
I'm wondering what you guys do with your fender/liners for the Gen1 Xterra's to clear 33's. I've trimmed a lot so far, but I'm really looking like I'm close or could be touching the metal of the fender or the rocker, not sure, but I'm wondering if you guys could share how you clear your tires in that corner of the truck, with pics
Re: Gen1 X Clearing 33s - Fender Side
Posted: Sun Apr 24, 2016 9:29 am
by Scotto
I used a BFH and beat the hell out of the corner of the fender.
Sent from my iThingy.
Re: Gen1 X Clearing 33s - Fender Side
Posted: Sun Apr 24, 2016 11:05 am
by the x kid
Or body lift.
Re: Gen1 X Clearing 33s - Fender Side
Posted: Sun Apr 24, 2016 11:20 am
by Nd4SpdSe
Running a 2" BL
Re: Gen1 X Clearing 33s - Fender Side
Posted: Sun Apr 24, 2016 4:39 pm
by the x kid
I thought it would clear no problem with the 3"sl and 2 " body. Interesting.
Re: Gen1 X Clearing 33s - Fender Side
Posted: Sun Apr 24, 2016 7:19 pm
by Adam
Similar issue on a pathfinder. Did what Scott did and problem solved.
Re: Gen1 X Clearing 33s - Fender Side
Posted: Sun Apr 24, 2016 11:16 pm
by Scotto
And I don't have no stinking body lift.
Sent from my iThingy.
Re: Gen1 X Clearing 33s - Fender Side
Posted: Mon Apr 25, 2016 6:56 pm
by Morpheus
I also used a bfh for clearance.
Re: Gen1 X Clearing 33s - Fender Side
Posted: Mon Apr 25, 2016 8:25 pm
by Scotto
BFH for the win! Was thinking BFH FTW but it seemed too much.
Might make a good t-shirt though. With a cool graphic.
Sent from my iThingy.
Re: Gen1 X Clearing 33s - Fender Side
Posted: Mon Apr 25, 2016 8:59 pm
by buttsy
I'd wear that shirt
Sent from my SM-G870W using Tapatalk