My suspension lift

[Simon]

I'll be there after I get my new coils in, if they show up this week.

[weerd 1]

Simon any word from national yet and by the way Serge and myself will be doing the rear springs/brakes on thursday so only the front will need to be done on Saturday

[Simon]

Nothing yet....calling them today.

[weerd 1]

the rear is done, it took longer than planned though

[rush356]

Rear was 34.5 now at 39.5. I like it
I have vibrations from 30 to 40 miles,
lil body roll on a hwy, yes Drew got his way - my sway bar is off.
Anyway it was a long day, just want to say big thanks to Drew and John.

[Simon]

Good to hear.

If you want to get an earlier start on Saturday, we could head over to my parent's place and work on the front there, as opposed to waiting for Drew to get off work at 2. Just a thought, and not trying to undercut you here Drew, but I believe Serge is planning on hitting the Drive-in on Saturday evening.

[X-Treme]

Well, wherever it's happening let me know so I can drop by and help and make sure you guys don't screw anything up. I'll even bring the new chainsaw...ahh, ooops, sorry, wrong tool. Never mind!

[X-Treme]

I have vibrations from 30 to 40 miles,

Probably because the front isn't done yet so the pinion angle is exaggerated or you didn't listen to me and you put the shims on backwards or you didn't listen to me and get the centre bolt washer and the axle is in the wrong position!

[rush356]

Drew said we can be at his place at 11am to start working.
After this morning gas fill up of 50 l it only vibrate from 30 to 35 miles.

[Pezzy]

I'll even bring the new chainsaw...ahh, ooops, sorry, wrong tool. Never mind!

Actually, if we go to Simon's parent's place, you might be able to put that to use...

[Pezzy]

I have vibrations from 30 to 40 miles,

Probably because the front isn't done yet so the pinion angle is exaggerated or you didn't listen to me and you put the shims on backwards or you didn't listen to me and get the centre bolt washer and the axle is in the wrong position!

Did you hear something???

[Simon]

Drew said we can be at his place at 11am to start working.
After this morning gas fill up of 50 l it only vibrate from 30 to 35 miles.

Up to you buddy. Let me know where.

[rush356]

I have vibrations from 30 to 40 miles,

Probably because the front isn't done yet so the pinion angle is exaggerated or you didn't listen to me and you put the shims on backwards or you didn't listen to me and get the centre bolt washer and the axle is in the wrong position!

Ok, shims are fat end to the front, and we put washers to lift center bolt head out of the shim. We made sure the bolt head is in the hole. I dont know, i'll have to see the front end done, which will transfer more weight to the back.

[rush356]

Up to you buddy. Let me know where.

Hey Simon i like to go with original plan of doing it at Drews house. I;ll be there at 11 am.

[Simon]

Alrighty....I'll be there around that time as well.

[Big Bird]

Well if Serge is going over to Simons then I can redo my torsion bar with Drew. Once I get off from work at 3pm.

[X-Treme]

Well if Serge is going over to Simons then I can redo my torsion bar with Drew. Once I get off from work at 3pm.

No, he's going over to Drew's also.

[Pezzy]

Oh boy.

[weerd 1]

John we could do those later after dinner if you are available if not stop by wemight be done by the time you get to my place

[Big Bird]

Well, wherever it's happening let me know so I can drop by and help and make sure you guys don't screw anything up. I'll even bring the new chainsaw...ahh, ooops, sorry, wrong tool. Never mind!

Dont forget the loctite Gino.