New 2012 Xterra Pro-4x member
-
Sustain26
- Newbie
- Posts: 3
- Joined: Fri Aug 18, 2023 4:18 pm
- Location: Quebec
- Make/Model: Nissan Xterra Pro-4x
- Year: 2012
- Tim's: Coffee
New 2012 Xterra Pro-4x member
New 2012 Xterra Pro-4x member - from Quebec, bought a used Xterra Pro-4x once owned by a Newfoundlander.
Will try to post current issues as they were discovered recently. Thanks for reading.
Will try to post current issues as they were discovered recently. Thanks for reading.
-
Adam
- Moderator
- Posts: 2917
- Joined: Wed Jul 30, 2008 4:10 pm
- Location: Ottawa Ontario
- Make/Model: Xterra SE SC
- Year: 2002
- Tim's: Medium Regular
Re: New 2012 Xterra Pro-4x member
Welcome to the group!
2002 SE/SC 3" SL 2" BL Calmini Bumper + Winch. Custom Rear bumper. ShrockWorks skid plates.
There is more stupidity than hydrogen in the universe, and it has a longer shelf life. -Frank Zappa
There is more stupidity than hydrogen in the universe, and it has a longer shelf life. -Frank Zappa
-
Bow_Tied
- Moderator
- Posts: 6131
- Joined: Mon Jun 02, 2008 11:20 pm
- Location: London
- Make/Model: Xterra P4X ZR2 Bison
- Year: '15/20
- Tim's: Medium DD
Re: New 2012 Xterra Pro-4x member
Welcome. Also check us on FB.
#MoreRon
"Most of the members are people, but there are a few exceptions." - Miner
"Most of the members are people, but there are a few exceptions." - Miner
-
Sustain26
- Newbie
- Posts: 3
- Joined: Fri Aug 18, 2023 4:18 pm
- Location: Quebec
- Make/Model: Nissan Xterra Pro-4x
- Year: 2012
- Tim's: Coffee
Re: New 2012 Xterra Pro-4x member
Ok, asking if anyone has used the following TSB in servicing their Xterra:
FA17-003 NTB17-026 March 7, 2017 Full text available here:
https://static.nhtsa.gov/odi/tsbs/2017/ ... 1-9999.pdf
BALL JOINT AXIAL END PLAY PROCEDURE
FA17-003 NTB17-026 March 7, 2017 Full text available here:
https://static.nhtsa.gov/odi/tsbs/2017/ ... 1-9999.pdf
BALL JOINT AXIAL END PLAY PROCEDURE
-
Adam
- Moderator
- Posts: 2917
- Joined: Wed Jul 30, 2008 4:10 pm
- Location: Ottawa Ontario
- Make/Model: Xterra SE SC
- Year: 2002
- Tim's: Medium Regular
Re: New 2012 Xterra Pro-4x member
Should be fairly simple with a floor jack. You're basically looking for play in any of the ball joints themselves or the control arm bushings. It'll be really obvious if it was enough to cause your tire issue for sure!
2002 SE/SC 3" SL 2" BL Calmini Bumper + Winch. Custom Rear bumper. ShrockWorks skid plates.
There is more stupidity than hydrogen in the universe, and it has a longer shelf life. -Frank Zappa
There is more stupidity than hydrogen in the universe, and it has a longer shelf life. -Frank Zappa
-
BigRed44
.jpg)
- Premium Member
- Posts: 683
- Joined: Sun Feb 20, 2011 12:23 pm
- Location: Tavistock
- Make/Model: Xterra Off Road
- Year: 2007
- Tim's: French Vanilla
Re: New 2012 Xterra Pro-4x member
Welcome to the Club
OF4WD 6318
HAM Call Sign VA3ERX
CNTC Member BigRed44
Overland Bound 9362
HAM Call Sign VA3ERX
CNTC Member BigRed44
Overland Bound 9362