Tom - ABS light is now out

Post by **Snafu** » Sat Sep 06, 2008 9:59 pm

Just to let you know that my ABS light is now out. I blasted the front end with water but the light remained on. I pulled the sensor and blasted the ring with water (lots of guck in there). I removed the tires so I could turn the rotor while spraying water in the hole. I made it about 50' down the road when the light went out.

Post by **Wildpix** » Sat Sep 06, 2008 10:49 pm

I did the same thing Ron, I always take my wheels off & clean all of the brake components after a run. It always seems to clear the abs light afterwards.

Post by **X-Treme** » Sun Sep 07, 2008 7:07 am

After having serviced the rear brakes yesterday I don't think just taking off the wheels and pressure washing the brake assembly cleans them out nearly enough. Once I removed the brake callipers I could see a whole lot of other debris that had accumulated in the brake calliper assembly that the pressure washer didn't remove. After having removed the rear rotors there was a whole other mess of debris inside the parking brake assembly that no pressure washer would ever be able to remove without removing the rotors.

Post by **Snafu** » Sun Sep 07, 2008 9:03 am

Thanks for the heads up

Canadian Nissan Truck Club